[Prev][Next][Index][Thread]

Re: Scroungein'



to: Chris

Give each tube inside and outside 3 separate coats of GE Glyptal (red 1201
not black) and allow 16 hrs to dry between each coat.  Wind and then apply 3
more coats drying between each coat.

Regards,

Dr.Resonance-at-next-wave-dot-net


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, April 17, 1999 5:11 PM
Subject: Scroungein'


>Original Poster: "christopher boden" <chrisboden-at-hotmail-dot-com>
>
>I have 2 ubes of Sonotube. They're industrial concrete forms made
>from 1/4" cardboard.
>The tubes are 12" X 10' Secondary form
>and           24" X 3' Primary form?
>
>I have a lathe to wind the secondary with and will coat it with a
>motor-winding insulation that is supposed to be better than PE or PU.
>Now I need some advise on what the hell I'm doing. This is getting to
>be a giant coil and for a first effort that's really unusual.
>I'm eager to learn about anything you guys can teach me, I'm doing
>everything I can.
>
>"Evolution Stops When Stupidity Is No Longer Fatal"
>
>
>Christopher A. Boden Esq.
>President/C.E.O.
>The Geek Group
>The Geek Shall Inherit the Earth!
>
>
>_______________________________________________________________
>Get Free Email and Do More On The Web. Visit http://www.msn-dot-com
>