[Prev][Next][Index][Thread]

Re: Any Very High Freq. TCs?



Ok Sam maybe you are right about the 1GHz coil being a bit extreme and
likely dangerous but it should still be possible to push the frequency
of a TC a good deal before you needed to deal with the problems of
very short wavelengths and the associated directivity and waveguide
issues. I should have stressed that I really meant to simply increase
the frequency at most 2 or 3 orders of magnitude to the RF range and
not to put it all the way into the microwave region. I was
exaggerating about 1 GHz but in light of your earlier CW Microwave
experiment I can see why you would be concerned for my safety. 
Hmmm now that you mention it I do have a small parabolic dish and a
1000 watt magnetron on the self over there and we are going to have a
weenie roast up at work next week. Bye, got to go, lots of things to do.

Steve 
adder_black_the-at-yahoo-dot-com
Dallas Texas

---Tesla List <tesla-at-pupman-dot-com> wrote:
Original Poster: "Sam Barros" <sambarros-at-hotmail-dot-com> 
_________________________________________________
Original Post By Steve
Snip 
>1 GHz TC operating on my kitchen table : ) Is >there some particular
flaw in this scaling idea.
End Snip 
__________________________________________________ 
Return Post By Sam
Snip
> Why would you want such a high frequency TC for? >I would expect the
microwaves coming from it to >be VERY hazardous... 
End Snip
Snip
>I did some research into this field with my >focusable 1KW microwave
gun. It is basically a >reassembled microwave oven inside a metal box 
>with a parabolic antenna focusing the 1000W >microwaves at any given
distance. That stuff is >EVIL!!! I am always afraid of using it,
because >of the extensive damage it will cause to >organisms and
electronic equipment.  
End Snip
Snip 
>Imagine what a TC would do...
>If you value your life and electronic equipment, >stay away from
Microwaves....
>If you really feel you have to destroy stuff with >microwaves (like I
did), at least build something >you can control...
End Snip
>Sam.

_________________________________________________________
DO YOU YAHOO!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com