[Prev][Next][Index][Thread]

Re: Calendar



Hi all,
	i am designing a new flat plate cap, and want to try malcolms  idea of
keeping the voltage on each section below 2 Kv.
I have worked out that with by system (9Kv 50mA) I will need 10 sections of
177000 pF. This in itself is not a problem. what I was wondering is what is
the upper limit of separate sections one can use before  the e.s.r. becomes
a significant problem? I am planning to keep the plates to around 7" x 7"
and the dielectric thickness to 0.010".

any comments welcome

bob golding

bob yubba-at-clara-dot-net>