[Prev][Next][Index][Thread]

Re: Salt Water Poly Caps (fwd)





---------- Forwarded message ----------
Date: Sun, 29 Mar 1998 23:03:15 -0600
From: mel wise <mwise-at-ns.sosis-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Salt Water Poly Caps (fwd)

At 09:45 PM 3/29/98 -0700, you wrote:
>
>
>---------- Forwarded message ----------
>Date: Sun, 29 Mar 1998 17:35:58 -0800 (PST)
>From: gweaver <gweaver-at-earthlink-dot-net>
>To: Tesla-at-pupman-dot-com
>Subject: Salt Water Poly Caps
>
>So people use salt water caps in glass bottles which has a power loss of
>about 50%. So I have a new idea.  Polyethylene is much better than glass and
>soft drink bottles are made of polyethylene.  I know the thickness of the
>soft drink bottles are only about .010 thousands so about 10 bottles will
>have to be connected in series to get a good voltage rating.  Has anyone
>tried this?  Can anyone thing of a container that is made of poly and is
>thicker than a soft drink bottle?
>
>IDEA
>
>What if you cut the top off of 10 large 2 liter bottles and place a 16 oz.
>bottle inside each one.  Fill both with salt water and connect all 10 in
>series.  You may have to make several of these to get the correct uf value
>needed for your system.  The power lose should be much getter than glass.
>The cap might get rather large too but its easy to make.
>
>I'm not planning to build one of these.  Just an idea for the guys that
>don't have good caps yet.
>
>Gary Weaver
>
>
Trash cans are made of about .060-.080 mil polyethylene.

Chris