[Prev][Next][Index][Thread]

Re: Slightly off subject request for identification (fwd)





---------- Forwarded message ----------
Date: Thu, 16 Jul 1998 17:55:34 -0700
From: Ed Phillips <evp-at-pacbell-dot-net>
Reply-To: ed-at-alumni.caltech.edu
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Slightly off subject request for identification (fwd)

"e has a tube(I
would describe it as a diode as it has only two pins) that is
cylindrical with a diameter of approximately 2" and length of 6".  One
pin on each end.  This is stamped in the metal on one end: VC50-20.  And
this is printed in ink near by: 48B081. "

	Sounds very much like a vacuum dapacitor.  Try Jennings.

Ed