[Prev][Next][Index][Thread]
Tanny in alliance with Satan
----------
From: Jeff Corr [SMTP:corr-at-enid-dot-com]
Sent: Sunday, February 01, 1998 7:00 PM
To: Tesla List
Subject: Re: Tanny in alliance with Satan
I hate that. Well if thats your problem, just hook one wire to the
HV side that works and the other to the ground. That will give you
7500 volts. Unpotting works a good percentage of the time, but not
usually the first time. Your best bet is to start looking for another
one...
At 03:37 PM 2/1/98 -0600, you wrote:
>
>----------
>From: Dan Ressler [SMTP:danz_da_man-at-hotmail-dot-com]
>Sent: Sunday, February 01, 1998 1:37 PM
>To: tesla-at-pupman-dot-com
>Subject: Tanny in alliance with Satan
>
>......ok Im the moron who decided to make the tesla coil for a science
>project when I only had a couple weeks to do it. So here is the scoop,
>I have desined and built a coil. It came time to test the gaps I
>made.......well I find that half my tranny (NST 15kv/30ma) has plotted
>against me and decided not to put out. So as soon as I can Im going to
>start calling all the sign shops lookin for a new one.....but I might
>not have luck and Ive heard of "depotting" or resurecting dead trannies
>by taking out the gunk inside. Can some one explain this to me, and
>tell me if it is worth the work, and if I could get it done in a week.
>Thanks to all who help and have helped.....
>Dan
>
>
>
>
Jeff Corr | corr-at-mail.enid-dot-com | 580-234-6749
http://www.harvestcomm-dot-net/personal/corr/index.htm
ICQ UIN # 1303360 | Nick TacoBell