Capacitors,how to ?

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Capacitors,how to ?
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 20 Feb 1998 08:04:41 -0600
• Approved: tesla-at-stic-dot-net

----------
From:  Justin Oliver [SMTP:joelec1-at-ozemail-dot-com.au]
Sent:  Friday, February 20, 1998 12:22 AM
To:  tesla-at-pupman-dot-com
Subject:  Capacitors

I've got a 10Kv 10ma ingnition xfrmr and need a 0.0032uF rating to resonate
and want to build one of my own. I have been told that flat stacked
capacitors work best at this lower capacitance and I need to know how thick
the insulating material is and how many layers to use. I would like to be
able to use it on higher voltage xfrmrs when I get some so the voltage needs
to be around 20Kv. Also I have a 2Kv microwave xfrmr and I have been told to
use a 0.90uF capacitor rated at 2500v. I thought this was a bit large but I
don't know the current it gives. 

Justin Oliver

• Prev: would a 15kv 300 amp mri power supply
• Next: Tesla Gizmo
• Index(es):
  • Main
  • Thread