[Prev][Next][Index][Thread]

Re: HV at very LOW freq. Tesla Coil




From: 	Jean-Marc Patten[SMTP:jp001-at-mail.orion-dot-org]
Sent: 	Tuesday, September 16, 1997 12:06 PM
To: 	Tesla List
Cc: 	'Tesla List'
Subject: 	Re: HV at very LOW freq. Tesla Coil

well i have about 10 oil burner xformers at 10Kv -at-10Ma but i dont think
they will have the juice to do the job. But to answer your question about
10cps <10Hz>. I have looked all over the net for info but everyone is High
voltage high freq.
thank you for responding 

john

On Tue, 16 Sep 1997, Tesla List wrote:

> 
> From: 	Bert Hickman[SMTP:bert.hickman-at-aquila-dot-com]
> Reply To: 	bert.hickman-at-aquila-dot-com
> Sent: 	Tuesday, September 16, 1997 8:18 AM
> To: 	Tesla List
> Subject: 	Re: HV at very LOW freq. Tesla Coil
> 
> Tesla List wrote:
> > 
> > From:   Jean-Marc Patten[SMTP:jp001-at-mail.orion-dot-org]
> > Sent:   Monday, September 15, 1997 4:22 PM
> > To:     tesla-at-pupman-dot-com
> > Subject:        HV at very LOW freq. Tesla Coil
> > 
> > I Need any info on this subject i am researching this befor i invest to
> > much $$ all info wanted
> > 
> > thankyou
> > 
> > John
> > jp001-at-mail.orion-dot-org
> 
> John,
> 
> How low a frequency? How big a coil you willing to make??
> 
> -- Bert --
> 
> 
> 
> 
>