Re: Toroids

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: Toroids
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Tue, 2 Sep 1997 18:46:39 -0500
• Approved: tesla-at-stic-dot-net

From: 	DR.RESONANCE[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Tuesday, September 02, 1997 11:18 AM
To: 	Tesla List
Subject: 	Re: Toroids

To: Dale

If running a .005 or .01 MFD cap with a 30 ma or 60 ma neon xmfr then a 3 x
12 or 5 x 14 toroid works fine.  If running .02 or .03 MFD with 120 or 180
ma xmfr respectively then a 20 x 5 or 24 x 5 toroid will work well.  The
smaller size 3 x 12/5 x 14 is used with a 3-4 inch dia sec coil and the
larger toroids usually used with a 6-10 inch dia sec coil.

DR.RESONANCE-at-next-wave-dot-net


> 
> From: 	Dale F. Pfaffle[SMTP:pfaffle-at-tele-net-dot-net]
> Sent: 	Monday, September 01, 1997 7:33 PM
> To: 	Tesla List
> Subject: 	Toroids
> 
> Been reading the discussion on toroid size "More Research".  Is there
sort
> of a rule of thumb on the size a toroid should be, in a small system,
with
> regard to the size of the secondary coil?  This would be sort of a
starting
> size, as I gather the toroid size can increase to large proportions with
> the application of more power.
> Thanks.
> 
> Dale 
> KC7VIS
> Nevada.
> 
> 

• Prev: A Puzzle
• Next: Re: Static Air-blast gap.
• Index(es):
  • Main
  • Thread