[Prev][Next][Index][Thread]

Re: Rotary Modifications Update





---------- Forwarded message ----------
Date: Thu, 16 Oct 1997 17:07:53 -0500
From: Chuck Curran <ccurran-at-execpc-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Rotary Modifications Update  

John:

The current capacitance in use totals .075 mfd, so it's a good sized tank
cap.  I have not tried offsetting the electrodes, however the way I built
the rotary would make this a pretty straight forward change.  I've already
had to pack up my coiling for the winter since I needed the garage back,
already there's several things on my to-do list for next spring!  I wish I
had a warm spot to run during the winter.  I could take everything to work,
but it might be hard to explain if the computer network or anything else
started to perform in a less than predictable manner   :^)

Chuck
-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Thursday, October 16, 1997 10:59 AM
Subject: Re: Rotary Modifications Update


>
>
>---------- Forwarded message ----------
>Date: Thu, 16 Oct 1997 10:36:32 -0400 (EDT)
>From: FutureT-at-aol-dot-com
>To: tesla-at-pupman-dot-com
>Subject: Re: Rotary Modifications Update
>
>In a message dated 97-10-16 00:47:43 EDT, you write:
>
><< snip>
>> Is your "offset" method basically shifting the stationary electrodes so
the
>> result is to minimize the time for alignment and/or conduction?
>
>> Chuck
>  >>
>
>Chuck,
>
>Thanks for the additional info.  I'm quite sure the gap isn't refiring
>in an undesirable way although I forgot to ask your capacitor size,
>a small capacitor can also contribute to this double firing.  Your
>use of an external static series gap also makes re-firing unlikely.
>
>Yes, the offset method is exactly what you mention, in some TCs
>it helped my results, in other smaller ones, it didn't.  Have you
>ever tried offsetting the electrodes, any change in performance?
>
>John Freau
>