[Prev][Next][Index][Thread]

Re: Rubber toroids





---------- Forwarded message ----------
Date: Thu, 16 Oct 1997 11:53:13 +1200
From: Malcolm Watts <MALCOLM-at-directorate.wnp.ac.nz>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Rubber toroids  

I may have mentioned this a few days ago so sorry if it's a repeat. 
I'm currently building terminals out of polystyrene foam, if 
necessary by sticking blocks together with ADOS polystyrene contact 
glue then shaping them roughly with a serated knife and sanding to a 
smooth finish. Then I give them a single coat of cooking foil using 
the same adhesive. The ridges and bumps in the foil are made quite 
smooth by rolling the finished article around on a hard flat surface. 
Works well.

Malcolm