Re: 10KV RMS -at- 300MA for less than $100

• To: tesla-at-poodle.pupman-dot-com
• Subject: Re: 10KV RMS -at- 300MA for less than $100
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sun, 23 Mar 1997 19:56:09 -0600
• Approved: tesla-at-stic-dot-net

Subject: 
           Re: 10KV RMS -at- 300MA for less than $100
      Date: 
           Sat, 22 Mar 1997 17:10:47 -0600
      From: 
           rickh-at-ghg-dot-net (Rick Holland)
  Reply-To: 
           rickh-at-ghgcorp-dot-com
        To: 
           Tesla List <tesla-at-pupman-dot-com>
References: 
           1


Tesla List wrote:

> > According to my C&H catalog, TR9407 "10MFD 660VAC required and included"
> > You might want to call them up and see what is going on.  Also, is 4500VAC
> > enough to work a coil?
> >
> > LT

-- 
I have built and operated a coil that ran on a 3Kv60ma "indoor only"
neon sign transformer. I built it without the knowledge and expertise
available on this list, but it would generate 4 to 6 inch sparks with
only a two-piece spark gap made of machine head bolts. I must admit that
it was built on the Oudin principle, where the primary and secondary
shared a common ground. I still have the transformer, and may attempt to
reproduce the effect with the knowledge I have gained.


   Rick Holland

   The answer is 42.

• Prev: Re: 10KV RMS -at- 300MA for less than $100
• Next: Re: GNATS meeting, and harmony/synergy
• Index(es):
  • Main
  • Thread