[Prev][Next][Index][Thread]

Re: Other changes



Ed:

>I will check on the primary readings again and note welder and pig growling
>next time I get it set up.
>
>Ed Sonderman

I had this problem once, and it turned out that I had a carbon-track down
the inside of my secondary. This happened to *all* of my uncapped
secondaries eventually, but the time I'm speaking of here, the seconadry was
capped and sealed, and the wire did *not* enter the form. Apparently,
inter-winding breakdown was happening on the inside of the form. Just a
guess though.
I really hope that this isn't the problem though. I remember how much work
you put into it. :)

Good luck,

Dan