[Prev][Next][Index][Thread]

Re: 200kHz good, 100kHz better. (fwd)



In a message dated 96-07-24 00:50:21 EDT, you write:

> Without a discharge electrode sparks break out not on the toroid 
>  >>but on the wire between the coil and the toriod - how do I stop this?
> it was being warmed by induced currents. (toroid)

    Hi Alan,
             
             What is the construction / geometry of your toroid ?
    I'm curious about the eddy currents ------ 
            

Thank you,

                 Sandy