[Prev][Next][Index][Thread]
Re: Gluing Plastics
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Gluing Plastics
-
From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz>
-
Date: Tue, 16 Apr 1996 08:36:47 +1200
-
>Received: from rata.vuw.ac.nz (root-at-rata.vuw.ac.nz [130.195.2.11]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id OAA27294 for <tesla-at-grendel.objinc-dot-com>; Mon, 15 Apr 1996 14:36:58 -0600
Hi all,
Thanks for the info you all sent on gluing PC. I had also
heard that methylene chloride was the one but on trying a bottle I was
given supposedly with that stuff in, it ran off the plastic like
water. I'll try another source. It DID work on acrylic OK. The most
common solvent used on acrylic (chloroform) failed to touch the
polycarbonate.
Regards all,
Malcolm